MEX pumps are monobloc pumps with rotating assembly supported by the electric motor ball bearings. The motor is UNELMEC type V1/B3. The whole pump is supported by the motor feet.
The impeller is always made of bronze or stainless steel, thus improving the corrosion resistance as well as the wear which could be caused by cavitation, while strongly increasing the pump reliability.
All the pumps can be coupled with both 50and 60 Hz motors.
These pumps can also be used as compressors.
Where to use it
They are used to convey air and gas, even with suspended liquid, providing there are no solid parts or dusts. They are widely used in chemical, pharmaceutical, food, textile, and plastic industries, for gas and vapour extraction, for evaporation and vacuum impregnation.
Depending on how agresive the media is, they can also be delivered with different kind of coatings in the internal parts, such as ECTFE, ETFE, PFA.
The same serie is also produced in a magnetic coupling execution; Such a solution is recommended any time the handled gas or fluid is explosive or toxic.
